Honda Acura Brake Pedal Recall 2025: 259,000 Cars Affected – Check If Yours Is on the List
The Honda Acura brake pedal recall has impacted approximately 259,000 vehicles across the United States, marking a critical automotive safety issue. This urgent recall was announced after it was discovered that certain models may experience brake pedal detachment, posing a serious risk of brake failure and potential accidents.
According to the official NHTSA recall notice, popular Honda and Acura vehicles manufactured between 2020 and 2024 are among the affected units. If you’re searching for your vehicle on the Honda recall list in the USA or want to understand the full recall repair process, this article provides everything you need to know—including expert safety tips and how to check your car’s recall status using the VIN.
What Is the Honda Acura Brake Pedal Recall?
The Honda Acura brake pedal recall is a major safety announcement affecting over 259,000 vehicles across the United States. This urgent recall was issued due to a critical defect in the brake pedal pivot pin, which may not be properly secured. If the pin shifts or dislodges, it can cause the brake pedal to lose function, leading to brake failure risk and a higher chance of accidents.
Why This Recall Matters
Honda’s internal investigation, followed by a formal NHTSA recall notice, confirmed that the defective part was installed in select Honda and Acura models manufactured between 2020 and 2025. Although only a small percentage of vehicles are expected to be impacted, the consequences could be severe if not addressed quickly.
Affected Models in the Recall
According to the Honda recall list USA, these models are included:
- Acura TLX (2021–2025)
- Acura MDX (2023–2025)
- Honda Pilot (2023–2025)
The flaw stems from a now-closed U.S. facility where the pivot pin was improperly staked during the brake pedal assembly process. In order to avoid any road risks, Honda has consequently ordered an emergency recall.
What Owners Should Do
If you own one of the affected models, it’s crucial to check your vehicle’s status using your VIN on Honda’s official site or NHTSA’s recall portal. If listed, you’re eligible for a free inspection and recall repair process at your nearest dealership. Official letters will be sent to owners by July 28, 2025, and dealership repairs have already begun.
List of Affected Honda & Acura Models
As part of the Honda Acura brake pedal recall, over 259,000 vehicles in the U.S. are being recalled due to a brake pedal pivot pin defect. This issue can lead to the brake pedal detaching or malfunctioning, significantly increasing the brake failure risk.
The following models are confirmed under the NHTSA recall and are part of the Honda recall list USA:
Affected Vehicles Table
Brand | Model | Model Years | Brake Issue Summary |
---|---|---|---|
Acura | MDX | 2023–2025 | Pivot pin may dislodge, leading to brake pedal malfunction |
Acura | TLX | 2021–2025 | Improperly secured pedal pin, risk of brake failure |
Honda | Pilot | 2023–2025 | Brake pedal may shift or detach during use |
Why Are 259,000+ Vehicles Being Recalled?
In a serious safety move, Honda and Acura have recalled over 259,000 vehicles in the U.S. due to a hidden issue inside the brake pedal assembly. At the heart of the problem is a tiny but critical part — the brake pedal pivot pin — which wasn’t properly secured during manufacturing. If this pin slips out of position, it can cause the brake pedal to move abnormally or even lose function entirely.
And when it comes to brakes, even a minor flaw isn’t just technical — it’s dangerous.
The Real Danger: Brake Failure Risk
Imagine pressing your brake pedal and feeling it suddenly give way. That’s exactly the brake failure risk this recall is trying to prevent. A loose or misaligned pedal pin can make braking unpredictable, putting both the driver and others on the road in danger. According to official data, while only about 1% of the vehicles may have the defect, the risk of a serious accident is high enough to trigger a large-scale recall.
Which Cars Are Impacted?
This issue has affected multiple Honda and Acura models manufactured between 2021 and 2025, including:
-
Acura TLX
-
Acura MDX
-
Honda Pilot
These models were assembled in a U.S.-based plant that has since been closed. The faulty brake parts came from this facility before the company shifted operations elsewhere and improved quality control.
How Did Honda Discover the Issue?
It all started in April 2024, when the company noticed inconsistent brake feedback during internal checks. By June 2025, the defect was confirmed, and Honda filed an official report with the National Highway Traffic Safety Administration (NHTSA). That’s when the honda acura brake pedal recall became public.
Since then, Honda has updated its inspection process, moved production to a different plant, and added new safeguards to ensure the recall repair process is smooth and effective for car owners.
Human Insight: Why It Matters to You
Let’s be honest — most recalls feel like paperwork. But this one is different. Your brake pedal is your car’s lifeline. If you own one of the affected Acura or Honda models, don’t wait. Even if the risk is small, the consequences aren’t worth ignoring.
How to Book a Free Brake Inspection or Repair
If your vehicle is included in the Honda Acura brake pedal recall, you’re eligible for a completely free brake inspection and repair at an authorized dealership. This recall addresses a serious safety issue related to the brake pedal pivot pin, which may become loose or detached during operation—posing a high brake failure risk.
Here’s a step-by-step guide to help you book your free service and stay safe on the road.
Step 1: Check If Your Vehicle Is Affected
The first thing you need to do is confirm whether your car is part of the recall. Use your 17-digit Vehicle Identification Number (VIN) and check it on either of these trusted platforms:
-
The official Honda Recall Lookup
If your car is listed, you are eligible for a free recall repair process.
Step 2: Look for Official Notification
Honda began notifying dealerships about this recall on June 13, 2025, and owners began receiving official recall letters from July 28, 2025. Even if you haven’t received a letter, your vehicle might still be affected. That’s why checking your VIN online is highly recommended.
Step 3: Contact Your Nearest Dealership
Once you confirm your recall status, reach out to your nearest authorized Honda or Acura dealership. You can schedule a service by:
-
Using the dealership’s online service booking portal
-
Calling the service department and requesting a “brake pedal recall inspection”
Make sure to mention the honda acura brake pedal recall and provide your VIN.
Step 4: Get Your Car Inspected and Repaired
When you arrive at the dealership:
-
They will inspect the brake pedal pivot pin for any damage or misalignment.
-
If needed, they will repair or replace the brake pedal assembly at no cost.
-
The work will follow the official recall repair process approved by Honda and NHTSA.
Step 5: Keep Your Repair Record
After the repair, make sure to get a written confirmation or service receipt. The dealer will update your recall status in the NHTSA system, confirming your vehicle is now safe.
If you previously paid for similar repairs before this recall, you may be eligible for a reimbursement. Check with Honda or Acura customer service for details.
Official Statement from Honda and NHTSA
Both Honda and the National Highway Traffic Safety Administration (NHTSA) have issued official statements regarding the Honda Acura brake pedal recall, which affects over 259,000 vehicles in the U.S.
Honda’s Official Recall Notice
According to Honda, the issue involves a brake pedal pivot pin that may not have been properly secured during manufacturing. This can lead to lateral movement of the brake pedal, unusual brake feel, and even increased brake failure risk.
Honda stated:
“If the pin shifts, the brake pedal may become unstable, brake lights may stay on, and the brake system may not function as intended.”
To address the issue, Honda is offering a free recall repair process at all authorized dealerships, ensuring that affected vehicles are inspected and repaired at no cost.
NHTSA’s Position on the Recall
The NHTSA recall notice confirms the defect and emphasizes the safety concern. The agency highlights that a loose brake pedal could reduce a driver’s ability to stop the vehicle, significantly increasing the crash risk.
NHTSA also reported:
- 3 warranty claims linked to the issue
- No accidents or injuries reported so far
- Estimated 1% defect rate, but large recall issued for safety
What You Need to Know
- Dealer notifications began on June 13, 2025
- Owner letters will be mailed by July 28, 2025
- The recall repair process includes inspection and replacement of the faulty brake pedal pivot pin
Is It Safe to Drive Before Repair? Expert Opinion
Many car owners are asking whether it is safe to continue driving before completing the official service under the honda acura brake pedal recall. While Honda and NHTSA have not issued an outright ban on driving these vehicles, they strongly urge all affected owners to get their vehicles inspected and repaired as soon as possible. The reason is tied to a potentially serious defect in the brake pedal pivot pin, which could loosen or shift, increasing the risk of reduced brake performance or even total brake failure.
According to the official recall notice, symptoms such as a soft or unstable brake pedal, constant brake lights, or a lit brake malfunction warning indicator may signal that the defect is already affecting your vehicle. If any of these signs appear, experts advise that you should stop driving immediately and contact your nearest authorized dealership. Even if your car feels fine, the issue may still exist internally, which is why the honda acura brake pedal recall was issued for over 259,000 vehicles across multiple model years.
If your vehicle shows no symptoms and the brake system feels normal, driving short distances with caution may be acceptable for the time being. However, safety professionals emphasize that this is not a permanent solution. Since the honda acura brake pedal recall repair is completely free and easy to schedule using your VIN, there is no reason to delay. Acting early ensures your vehicle is not only compliant but fully safe for you and others on the road.
Frequently Asked Questions (FAQs)
1. Why is Honda recalling over 259,000 vehicles?
Due to a brake pedal pivot pin defect that may cause brake failure risk.
2. How can I check if my Honda or Acura is recalled?
Enter your VIN on Honda, Acura, or NHTSA recall lookup sites.
3. Is it safe to drive before recall repair?
Not recommended. Get the recall repair process done ASAP to stay safe.
4. Which models are affected by the brake pedal recall?
Acura TLX (2021–2025), MDX (2023–2025), Honda Pilot (2023–2025).
5. Is the recall repair free of cost?
Yes, the honda acura brake pedal recall repair is 100% free at dealerships.
Conclusion:-
The Honda Acura brake pedal recall is more than just a routine manufacturer update—it’s a serious safety concern affecting over 259,000 vehicles across the U.S. We’ve covered everything from the root cause—a potentially loose brake pedal pivot pin—to the risks of brake failure, affected models like the Acura TLX, MDX, and Honda Pilot, and expert advice on whether it’s safe to drive before repair.
Both Honda and NHTSA have taken clear steps to address the issue, offering a free recall repair process that can be easily scheduled online or at your nearest dealership. Even if your vehicle seems fine, ignoring the recall could put you and others on the road at risk.
If your vehicle is part of this recall, don’t wait. Use your VIN to check your recall status, schedule your free brake inspection, and get peace of mind knowing your car is safe and road-ready.